Our employees are really happy, they say it was easy to install, it’s easy to work with, takes little space to store, and it doesn’t take away too much length on our chain sling. It’s a great product!
July 16th, 2018
"...The customer is very happy with the product..."
August 14, 2019
"...We purchased our first set of Ron Crane Scales in 2012 to assist with critical lifts that require continuous load-monitoring. The wireless remote indication offered with model 2501 satisfies our needs and as a result of Ron Scale’s reliable operation we have since purchased three additional units, all of which continue to operate flawlessly and perform well beyond our expectations..."
August 12, 2019
"...the products of Eilon Engineering are sturdy and we are happy with the same..."
Precision Sensors & Systems
August 13th, 2019
"...The Ron Crane scales 2501-H that we have are working great. We are a heavy industrial cast/ductile iron Foundry.
The Foundry has been around since the late 1800s. Our precision made castings weigh between 12,000 lbs-200,000 lbs.
We have 3 - 50 ton induction melting furnaces.
We charge our Furnaces with an OH 10 ton crane using a standard Block/Hook. The Ron 2501 scales hang from hook and a 52” DC magnet
hangs from the scale. Th
e average charging weight is around 8,000 lbs per charge.
The Ron 2501 scales have proven so far to take the heat while charging. The light weight/small design makes it easy to handle when taking off
With the small design height issues we had before no longer exist.
Overall, I’m pleased with the Ron 2501 for our application..."
August 14th, 2019
Balcones Technologies, LLC under contract with the US Army developed vehicle self-recovery poses for a vehicle equipped with an active suspension.
The active suspension developed at the University of Texas Center for Electromechanics features high bandwidth controlled actuators on each of the vehicles wheels.
A test approach was developed for the self-recovery poses which involved measuring the vehicles drawbar pull capacity while tires are spinning and slipping.
The tests were performed on asphalt, dry grass, and gravel.
It was anticipated that the self-extraction poses would provide momentary improvement in the vehicle traction which could be detected by measuring the drawbar pull force.
Baseline tests with active suspension off and then test were performed with the suspension while performing various poses.
A light weight load cell with dynamic measurement capability was desired which led to the selection of the Ron Crane 4000 load cell.
We chose it with the analog output feature and recorded it on the vehicles data acquisition system.
The vehicles 24VDC power was used to power the load cell. The Ron Crane load cell worked well in our application.
We were able to collect data at 100 samples/sec and demonstrated ability to cyclically improve vehicle traction.
Balcones Technologies, LLC
July 26th, 2018
...we always find Eilon efficient, accurate, and a pleasure to work with!
July 26th, 2018